Installing The Ap; Installing The Device On A Wall - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide


Table 2-2 General anti-interference requirements
Scenario
Indoor
installation

2.5 Installing the AP

2.5.1 Installing the Device on a Wall

Mounting kits and expansion bolts are required to install the AP on a wall. The
AP4050DN-HD can be installed on a wall using an
bracket.
Indoor Fixed Mounting Bracket
1.
Issue 01 (2016-04-15)
Install the AP in a site that is free from leaking or dripping water, heavy dew, and
humidity, and take protective measures to prevent water from flowing into the equipment
along the cable.
Do not install the AP in an environment with high temperature, dust, poisonous gases,
flammable or explosive objects, electromagnetic interference (from a radar station, radio
station, or substation), unstable voltage, violent shakes, or strong noise.
Deployment Distance Requirement
There should be at least a 7 m distance between antennas.

The antennas should be placed at least 2 m from the 4G antennas of

the carrier.
The antennas should be placed far away from electronic devices that

may produce interference, such as microwave ovens.
If antennas are embedded into APs, the deployment distance requirements on the antennas are those on
APs.
Remove the protective film on the surface before installation to prevent electrostatic discharge.
The indoor fixed mounting bracket is delivered together with the AP, but the angle-adjustable mounting
bracket is optional and needs to be purchased separately.
Fix the mounting bracket to the wall, adjust the installation position, and use the marker
to mark the drilling positions where expansion screws are installed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
indoor fixed or angle-adjustable
2 AP Installation
mounting
10