Table of Contents
Advertisement
OPERATION
Seed Rate Change, 11 to 22 Tooth
Seed Rate shown on Seed Rate Charts can be doubled
by using the 22 Tooth Sprocket provided in the
Transmission. See Figures 3-17 and 3-18.
1. Loosen Drive Chain.
2. Open Drive Chain at Connector Link.
Figure 3-17: Drive Chain Set for 11 & 22 Tooth Seed Rate - 01/2020 and After
3-14
3. Remove Roll Pin in the 11-22 Tooth Sprocket.
4. Move the 11-22 Sprocket to new position and replace
Roll Pin.
5. Add 4 Pitch Roller Chain with Connector Link to
Drive Chain. If required, Offset Connector Link can
be ordered separately. See Parts Manual 9K997.
6. Adjust Chain Tension. See Figures 4-4 and 4-5.
9K998
Advertisement
Table of Contents
