Table of Contents
Advertisement
OPERATION
Attaching/Detaching 3Pt Hitch
Seeder
To prevent the implement from tipping backward
on the frame, disengage parking pin only when
the seeder is fully attached to the tractor. Be sure
to observe the following sequences.
Figure 3-2: Parking Pin
Hooking Up the Seeder:
1. Attach Seeder to the Tractor.
2. Raise Seeder. Remove the Klik Pin, pull the Parking
Pin into the outer position, replace the Klik Pin. See
Figures 3-2 and 3-3.
Unhooking the Seeder:
1. With Seeder raised, remove the Klik Pin, push in the
Parking Pin, replace the KIik Pin. See Figures 3-2
and 3-4.
2. Disconnect the Tractor from Seeder, lower Seeder.
3-4
WARNING
Figure 3-3: Parking Pin Disengaged
Figure 3-4: Parking Pin Engaged
9K998
Advertisement
Table of Contents
