Table of Contents
Advertisement
MAINTENANCE
5. Rear Seed Box: Individual Seed Meter Cups can
be adjusted as required. Adjustments can be made
by loosening the 1/4-20 x 5/8 Machine Screws that
mount the Seed Meter Cup to the Seed Box. Adjust
the affected Seed Meter Cup so the Feed Shutoff is
against the Seed Meter Cup Star Washer in the Seed
Meter Cup (closed). Be sure the Feed Roll stays
engaged in the Seed Meter Cup Star Washer.
Figure 4-13.
Figure 4-13: Small Seed Meter
4-10
LED Warning Lamps
When plugging in the LED 7 Pin Warning Lamp
Connector:
1. Make sure the Tractor has a good clean Receptacle,
free of dirt and corrosion.
2. Make sure the 7 Pin Connector is inserted ALL the
way in. With tighter fitting pins, operator may think
the Connector is all the way in, but it really isn't.
3. Make sure the Tractor Receptacle Cover latches
over the keyway on the 7 Pin Connector to hold the
Connector in place.
If an operator plugs in the 7 Pin Connector, but the lights
do not seem to work right, check the above items to
make sure there is a good connection with the 7 Pin
Connector.
Figure 4-14: LED Warning Lights
9K998
Advertisement
Table of Contents
