Warning Lamp Installation, 8Ft And 10Ft - Landoll BRILLION TURFMAKER II SL Operator's Manual

Table of Contents

Advertisement

ASSEMBLY
Warning Lamp Installation, 8Ft
and 10Ft
NOTE
10Ft Drawbar model is shown, 10Ft 3Pt, 8Ft Drawbar
and 8Ft 3Pt models similar.
1. Attach Amber Lamp to the upper portion of the Light
Bracket located at the ends of the Seedbox with
1/4-20 x 1-1/4 Bolts and Locknuts.
2. Attach Red Lamp below the Amber Lamp with 1/4-20
x 1-1/4 Bolts and Locknuts. Ensure Red Lamp Lens
faces rearward.
3. Attach the Light Module to the Module Bracket with
1/4-20 x 1-1/2 Bolts and Locknuts. See Figure 2-22.
4. Layout the Lamp Harness, noting that the connectors
marked with Green Tape is Right Side and Yellow
Tape is Left Side.
5. Connect the Lamp Harness into the Light Module,
route the plugs with Green Tape along the front right
side of the Frame. Route the 3 prong cord up the
Light Bracket and plug into the Red Lamp. Route the
2 prong cord along the front of Frame, up the outer
Light Bracket and plug it into the Amber Lamp.
6. Repeat for the Left Side (Yellow Tape).
7. Plug the 7 Pin Harness into the Light Module, then
route the Harness along the Drawbar with the
Hydraulic Hoses and secure with Tie Wraps.
8. Bundle and secure excess cord to the Module
Bracket with Tie Wraps. Secure cords along frame
and drawbar using Adhesive Mounts and Tie Wraps.
NOTE
Install, route and secure Electric Clutch Harness with the
Lamp Harness.
IMPORTANT
All Harnesses must be firmly attached to machine
frame members or hydraulic hoses so they do not
sag or become torn loose by field debris.
9. Attach the SMV sign to the SMV Support with
5/16-18 x 1" Bolts, Flat Washers, and Locknuts.
10. Attach the Connector Holder to the Hose Support
with 1/4-20 x 1 Bolts, Flat Washers, and Locknuts.
2-16
NOTE
The plug on the other end of the 7 Pin harness connects
to the tractor socket when in use. When not in use, it can
be stored in the Connector Holder on the Hose Support.
Allow enough harness length to reach tractor socket and
roll or fold up excess and secure to Drawbar or Hydraulic
Hoses.
Figure 2-22: Light Module and Bracket
9K998

Advertisement

Table of Contents
loading

Table of Contents