Table of Contents
Advertisement
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack (Remove the system from the rack).
4. Place the system on a flat, level work surface.
5. Remove the access panel.
Remove the rear drive cage blank
Procedure
1. Power down the system (Power down the system).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack (Remove the system from the rack).
4. Place the system on a flat, level work surface.
5. Remove the access panel (Remove the access panel).
6. Remove the rear drive cage blank.
Removal and replacement procedures
40
Advertisement
Table of Contents
