Installing The Fl Inverter Board - Toshiba Satellite M45 Maintenance Manual

4.15 FL Inverter Board

Installing the FL Inverter Board

Install the FL inverter board according to the following procedures and Figures 4-37 and 4-
38.
1. Connect the LCD/FL cable to LCD/FL connecter, and connect the HV cable to HV
connecter.
2. Place the LCD module, FL inverter board in the correct position.
3. Fasten the three M2.5x4.5 white flat-head screws to secure the FL inverter board and
LCD module.
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
Figure 4-38 disconnecting the cables
4 Replacement Procedures
4-55