Fan/Cpu; Fan - Toshiba Satellite R10 Maintenance Manual

4.13 Fan / CPU
4.13 Fan / CPU

4.13.1 Fan

Removing the fan
The following describes the procedure for removing the fan. (See Figure 4-19.)
1. Disconnect the fan cable from the connector CN8770 on the system board.
2. Remove the following screws securing the fan and remove the fan.
M2.0x4.0B
M2.0x4.0B FLAT BIND
Installing the fan
The following describes the procedure for installing the fan. (See Figure 4-19.)
1. Install the fan while fitting the screw holes and secure it with the following screws.
M2.0x4.0B
2. Hook the fan cable to the guide and connect it to the connector CN8770 on the
system board.
4-32
FLAT BIND screw
CN8770
Fan
Figure 4-19 Removing the fan
FLAT BIND screw
4 Replacement Procedures
x2
Guide
M2.0x4.0B FLAT BIND
x2
Satellite R10 Maintenance Manual (960-509)