Heat Sink/Cpu - Toshiba QOSMIO E10 Maintenance Manual

4.18 Heat sink/CPU

4 Replacement Procedures
4.18 Heat sink/CPU
Removing the heat sink/CPU
The following describes the procedure for removing the heat sink and CPU (See Figure 4-30
and 4-31).
1. After Removing the following screws, remove the heat sink holder and heat sink.
• M2×4Z
BIND screw x3
M2x4Z BIND
Heat sink holder
Heat sink
Figure 4-30 Removing the heat sink
QOSMIO E10 Maintenance Manual (960-492) 4-51