AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 94

In addition, the Commentary Unit control screen contains the following items:
• Switches configuration : A representation of the switches on the CU is
shown. This configuration only can be changed on the actual CU.
• Connection field: Indicates whether the CU is connected directly to the
computer or if it is connected through the network.
• Address field: When the CU is connected through the network, this field
indicates the connection address. The address has the syntax CCU: xx - CU:
yy - Name where xx is the CCU address (from 0 to 31), yy is the number of
the CCU control module to which the CU is connected (from 1 to 10) and
Name is the name assigned to that CU.
4.4.6.2. Digital Level Processor (DLP)
4.4.6.2.1. Independence of the DLP in a CU
Before configuring the DLP, it is useful to know how the DLP functions. It is
important to clarify that each channel in a CU has its own DLP that can be
independently switched on, but the four DLPs in a CU are programmed
simultaneously, therefore it is not possible to set different dynamic curves in
different CU channels.
Digital Commentary System
-94-