AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 82

Network Configuration
fig. 4.4.2.C. Network configuration screen
This screen is intended to send the network configuration stored in the PC to
the actual network. As will be described later, each device on the network may
have an associated profile retrieved from a configuration file. This file is
created with the DCS Engineering Planning program and contains the profile of
the devices (CCU, CM and CU).
When this option is selected, a list of the profiles appears on the left list (see
fig. 4.4.2.C). When the Send Profiles button is pressed, all this profiles are sent
to the actual devices on the network. With this process, all the devices are
configured as planed before with only one step.
As the network profiles are updated, the result appears on the right list.
This action is also selected by pressing the rightmost shortcut button (Network
Configuration).
The configuration of the elements in the network are set in real time, i.e., not
when OK or Apply buttons are pressed.
Digital Commentary System
-82-