AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 92

CU INTERCOM
The CU INTERCOM zone is situated in the right hand column of the working
surface.
CONNECT. This button establishes the intercom circuit with the operators of
the console corresponding to the line module (this operates through the 4
wire software intercommunicator).
The left mouse button actives the RING to alert the corresponding CU
operators.
RESET
De-activates the intercom circuit, leaving it free.
LOCAL T´BACK:
Indicates the intercommunication circuit status. When CONNECT is
activated, USED is shown, and the allotted circuit is left to the operator
software.
When reset, READY is shown, and the facility is left available for any user.
Remote 4w Box
In this section is indicated if the Local T' Back circuit is redirected to an external
4w box. This connection is independent from if Local T' Back is activated or not.
Digital Commentary System
-92-