AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 107

The first task is the configuration of the computer serial port connection to the
CU and the communications parameters to be used. The following parameters
can be set:
• Port: It is possible to select the serial port of the computer to be used
(COM1, COM2, COM3, etc.).
• Baud rate: The communication speed in baud (not changeable).
• Data bits, Stop bits and Parity (not changeable).
• Enable long delay timeout: When the computer establishes communication
with network connected devices, it needs to send data and wait for the
response. If the communication conditions are degraded for any reason, the
user can increase the waiting time by enabling this option. This option is not
implemented yet.
4.5.2. Customizing the Commentary Unit audio parameters
It is possible to define the value of each parameter for each console as
explained in section 4.4.6.
Fig 4.5.1 Direct connection set up screen
Digital Commentary System
-107-