AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 109

4.6. Using the DCS Engineering Planning software
This software is intended to create and manage the configuration of the
network composed by several Commentary Control Units (CCU), Control
Modules (CM) and Commentary Units (CU). The difference with the software
named DCS Realtime Control is that the managing of this network is made in
an off-line mode.
The network structures are stored in disk files, so that the user can manage as
many configurations as desired. These configuration files may be retrieved by
the DCS Realtime Control software in order to use them as a preconfigured
vision of the actual network.
The devices composing the network structure can receive standard
configurations known as " profiles" . These profiles may be assigned to several
devices (CCU, CM, CU). So, the user may use standard profiles to be assigned
to the devices that form the network, store several network structures and, then
use them in the on-line control of the actual network.
In the following sections, this program will be explained in detail.
Digital Commentary System
-109-