AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 117

When a profile window is open, the options on the File menu bar change their
meaning. In this case, the Save, Save as and Close options are referred to the
profile configuration that is being edited. So, the following actions may be
performed :
• Save option : We will be asked to enter a name for the profile if it was not
previously assigned. If the profile had already a name, then, it will be saved
with no prompt.
• Save as option : We will be always asked for a new name for the profile.
Then, it will be saved.
• Close option : The profile window will be closed. If it was not saved, the user
will be asked to save it. This action is the same than closin the window
through the button on the top right corner of the window.
4.6.5.2. Special Profiles : <NONE>
This option is used to assign no profile to a device on the structure. It is used
by dropping and dragging the proper <NONE> option to the desired element.
This option is used as a procedure to " erase" the profile previously assigned to
an element. Only is allowed to move this special profile to an element that
corresponds with the profile window that is taken from, i.e. if we take the
<none> profile from Commentary Unit Profile window, only can be moved to a
CU, and so on.
4.6.5.3. Stored Profiles
This section contains a list of the existing profiles. When a new profile is
created, it must appear in this list. To assign one of these profiles to an
element, it must be dropped and dragged from the profiles list to the desired
element. As in the <none> profile, these profiles can only be moved to the
elements that correspond with the profile window where have been moved
from.
Digital Commentary System
-117-