AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 84

Each object in the tree can be selected to view and manage its configuration.
There are several ways to open a specific object, as follows:
• Pressing the open shortcut button.
• Selecting the menu item Open in the View menu option.
• Selecting the object with the right button of the mouse and selecting the
option Open in the contextual menu that appears.
The kind of window that appears depends on the type of object selected. These
windows are described in the following three sections.
Note that this tree may represent some elements that are not currently
connected to the actual network. This is because they were defined in the
network configuration that was loaded when the Network Connection was
selected (see 4.4.1). In this case, this elements will be marked with a " Pass
forbidden" signal.
On the other hand, elements that were not defined in the loaded configuration
but have been found in the actual network will be represented, but without any
name.
An asterisk sign(*) following the name of an element means that this
element possess a pre-configured profile. So, if the total configuration of the
network is transmitted to the actual network, the configuration of this profiles
will be stored on the actual devices. For more information about profiles, see
4.6 section about " DCS Engineering Planning" software.
If right mouse button is pressed over an element marked with (*), a menu
with the option " Send Profile" will appear. This option allows the user to
send the profile assigned to that element to the actual element in the
network. In this case, only an independent profile will be sent, to fix, for
instance, a previous transmission error.
Digital Commentary System
-84-