AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 10

1.4.- Control software
The control software is a native 32 bits application, designed to run under
Windows 95 or Windows NT operating systems. It performs the following tasks:
• Can work in direct connection to a single CU, through the serial port, for
upgrading, setting audio parameters and real time remote controlling of the
unit.
• Can be used in a network configuration, carrying the full control of a given
number of CCUs and their associated CUs. Up to 32 CCUs (320 CUs) can
be controlled in this way.
• Performs real time supervision of the Commentary Control Network, using a
standard RS 485 (2 wire) interface. The required hardware is included in the
CCU as a standard option.
• Enables the user to define off-line configurations of the venue commentary
system, including audio and operational pre-settings. These pre-settings can
be downloaded to the real venue Commentary System. The setup time and
presetting tasks are dramatically reduced.
*Microsoft Corporation registered trademark
Digital Commentary System
-10-