AEQ DIGITAL COMMENTARY UNIT Customer's Manual page 90

• IS SOURCE There are two International Sound connections available,
IS1 and IS2. It is only possible to connect one at a time to the control
module. Once selected, the source is mixed with the PROGRAM signal,
and can be sent to the Commentary Unit for listening.
The following buttons can be found in the lower part of the International
Sound working area:
CONFIG.DLP. Activates the corresponding DLP International Sound input
configuration screen. The DLP configuration screen procedure is detailed in
section 4.4.6.2.3. of this manual.
DLP. Activates the DLP corresponding to the International Sound input. A
simulated green LED indicator signals activation. The DLP function is
detailed in section 4.4.6.2. of this manual.
Guide - Aux.
The GUIDE and AUX switches and indicators can be found beneath the
International Sound working zone, these are replicas of the GUIDE ENABLE
and AUX ENABLE, that are described in section 3.4.2. of this manual.
Address.
The Address window, which displays the CCU and line number
corresponding to the module under control, can be found to the right of the
International Sound zone.
CUE.
The CUE working zone can be found beneath the Address window, a replica as
described in section 3.4.2. of this manual. This handles the connection of
CUE1 and CUE2 signals to the Commentary Unit.
• CUE 1: The activation of this switch sends the CUE1 signal to the
headphones of the commentators at the CU.
• CUE 2: The activation of this switch sends the CUE2 signal to the
headphones of the commentators at the CU.
The CUE1 and CUE2 switches are not exclusive, therefore if both switches
are activated, both signals will reach the headphones.
Digital Commentary System
-90-