External Dc Input - AEQ DIGITAL COMMENTARY UNIT Customer's Manual

2.4.2.3. Status functions
NOTE: If there is not any microphone open on the CU and the PROG mode is
selected on the CM, the ON AIR led will blink. If there is any microphone open,
the led will remain on.
• POWER ON indicator.
NOTE : There is no power switch, so, If you
need to turn off the device, you must
suppress the power by disconnecting the
connector " " FROM CONTROL UNIT" ór

" EXTERNAL DC INPUT" .

CONTROL CONNECTED. This arrow shows
when a valid data connection between the
CU and the CCU has been established.
• ON AIR. Shows when the control module
is in PRG mode, allowing the audio
program to reach the communication line.
When working in STAND ALONE mode,
this arrow indicates that there is at least
one channel opened.
Digital Commentary System
-29-