Preparing Machine For Road Travel; Switching Off The Machine - Krone ActiveMow R 200 Operating Instructions Manual

9.1

Preparing machine for road travel

KMG000-041
ü The machine is completely and correctly hitched to the tractor,
ü The machine is shut down and safeguarded,
ü The hydraulic hoses are connected,
ü The universal shaft is mounted,
ü The front guard is folded down, closed and locked (1),
ü The machine is in the transport position,
ü The locking (2) has been released,
ü The control units on the tractor are in neutral position and locked.
ü The stop cock (3) on the hydraulic hose is closed,
„ Lower the machine via the rear linkage enough to ensure that the maximum transport height
of 4 m is not exceeded.
„ Ensure adequate ground clearance.
9.2

Switching off the machine

KMG000-019
ü The machine is in the working position or transport position.
ActiveMow R 200
Original Operating Instructions 150000521_04_en
Preparing machine for road travel
refer to page 24.
refer to page 41.
refer to page 42.
refer to
refer to page 48.
refer to page 48.
refer to
Driving and Transport
refer to page 40.
page 43.
page 47.
9
9.1
51