Settings; Setting The Mower In Working Position; Setting The Cutting Height - Krone ActiveMow R 200 Operating Instructions Manual

10

Settings

Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
„ To avoid accidents, the relevant safety instructions must be read and observed,
page 12.
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
„ The safety routines must be read and observed to avoid accidents,
10.1

Setting the mower in working position

KM000-431
If the bolt (1) is centred above the marking arrow (2), the optimal working height of the machine
is set.
ü The machine is in the working position,
ü The machine is shut down and safeguarded,
„ To set the working height, raise or lower the lower link
10.2

Setting the cutting height

KMG000-035
The cutting height is adjusted via the top link (1).
ActiveMow R 200
Original Operating Instructions 150000521_04_en
Setting the mower in working position
WARNING
WARNING
refer to page 47.
refer to page 24.
Settings 10
10.1
refer to
refer to page 24.
53