Krone ActiveMow R 200 Operating Instructions Manual page 52

Rear mounted mower
Table of Contents

Advertisement

9
Driving and Transport
9.2
Switching off the machine
ü The relief spring is or the relief springs are relieved,.
„ Depressurize the tractor hydraulics.
„ For the "series" version: For the "series" version: Lower the machine until it is resting on
the support jack,
„ For the "additional support jacks" version: Mount the additional support jacks and lower
the machine until it is resting on the additional support
„ Lower the machine to the ground via the rear linkage.
„ Shut down and safeguard the machine,
„ Remove the universal shaft (3) from the tractor and place it on the storage surface (4).
„ Close the stop cock(s).
INFORMATION! Problems when connecting the machine the next time. To avoid problems
when connecting the machine the next time, depressurise the hydraulic system before
connecting the hydraulic hoses (5) and close the stop cock(s).
„ Remove the operating cable (2) from the tractor and place it on the machine.
„ Detach the top link.
„ Unlock the lower link hooks of the tractor.
„ Continue to lower the rear linkage until the lower link pins are free.
„ Drive the tractor away carefully.
52
refer to page 45
refer to
jacks,refer to
page 46.
page 24.
Original Operating Instructions 150000521_04_en
ActiveMow R 200

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ActiveMow R 200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents