Page 1
Disc Mower EasyCut F 280 EasyCut F 280 M EasyCut F 320 EasyCut F 320 M EasyCut F 360 EasyCut F 360 M (from serial no.: 856 285) Order no.: 150 000 112 02 en 27.11.2012...
Page 2
Type / Types: EasyCut F 280; EasyCut F 320, EasyCut F 360 EasyCut F 280 M ; EasyCut F 320 M, EasyCut F 360 M to which this declaration refers is in compliance with the relevant provisions of EC Directive 2006/42/EC (Machinery) The signing Managing Director is authorised to compile the technical documents.
Table of Contents Pos : 4 /Ü berschriften/Ü bers chriften 1/F-J/Inhalts verzeic hnis @ 31\mod_1251969952727_78.doc x @ 302165 @ 1 @ 1 Table of Contents Pos : 5 /BA/Inhalts verz eichnis Spr ac henneutr al @ 10\mod_1221574899104_0.doc x @ 135495 @ @ 1 Table of Contents ...........................3 Foreword ..............................6 Introduction.............................7...
Page 4
Table of Contents Operation...............................35 Before mowing ..........................35 Moving the guards into the working position ................... 36 Detaching the machine ........................37 Removing the compensation spring(s) .................... 37 Settings ..............................39 Compensation Spring(s) ........................40 Adjusting the Compensation Springs ....................41 Adjusting the cutting height......................
Page 5
Table of Contents 13.2 Test run............................71 Special equipment..........................73 14.1 Special Safety Instructions ......................73 14.2 Conversion to narrower swathing ....................74 14.3 Conversion for mowing steep slopes....................76 index ..............................78 Pos : 6 /BA/---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1...
Pos : 7.2 /BA/Vor wort/Eas yC ut/Verehrter Kunde Eas yC ut @ 3\mod_1204546394934_78.doc x @ 70529 @ @ 1 Dear Customer! By purchasing the disc mower, you have acquired a quality product made by KRONE. We are grateful for the confidence you have invested in us in buying this machine.
EasyCut F 280; EasyCut F 320; EasyCut F 360, EasyCut F 280 M; EasyCut F 320 M, EasyCut F 360 M Pos : 9.5 /Ü bers chriften/Ü bersc hriften 3/A- E/Ans pr echpartner @ 0\mod_1195569394286_78.doc x @ 839 @ 3 @ 1 3.2.1...
Note Authentic KRONE spare parts and accessories authorised by the manufacturer help to ensure safety. The use of spare parts, accessories or additional equipment not manufactured, tested or approved by KRONE will exclude any liability for consequential damage.
Introduction Pos : 9.12.1 /Übersc hriften/Übersc hriften 2/A-E/Besti mmungsgemäß er Gebrauch (alt) @ 0\mod_1196401545090_78.doc x @ 7728 @ 2 @ 1 Intended Use Pos : 9.12.2 /BA/Einl eitung/Besti mmungsgemäßer Gebrauc h/Eas yCut/Bes timmungsgemäß er Gebrauc h (Ei nz ahl) @ 3\mod_1204548357809_78.doc x @ 70671 @ @ 1 The disc mower is built exclusively for customary use in agricultural work (intended use).
Page 10
Introduction Pos : 9.17 /BA/Einl eitung/T ec hnis che D aten/Eas yC ut/Eas yC ut F 360 / 360 M @ 103\mod_1332225378538_78.doc x @ 940420 @ @ 1 Type EasyCut F 360 EasyCut F 360 M Working width [mm] 3570...
Safety Pos : 11.1 /Übersc hriften/Übersc hriften 1/P-T/Sicher heit @ 0\mod_1195566748646_78.doc x @ 635 @ 1 @ 1 Safety Pos : 11.2 /BA/Sicher heit/Überar bei tete Warnhinweis eKennz eic hnung von Hi nwei sen i n der Betriebsanl eitung Einführungstext (2012-07-27 09:59:06) @ 0\mod_1195637804826_78.doc x @ 1098 @ 2 @ 1 Identifying Symbols in the Operating Instructions The safety instructions contained in this manual which could result in personal injury if not followed are identified by the general danger sign:...
Safety Pos : 11.6.1 /BA/Sicherheit/Personalqualifi kati on und-Sc hul ung @ 0\mod_1195639383185_78.doc x @ 1136 @ 3 @ 1 4.2.1 Personnel Qualification and Training Fehler! Textmarke nicht definiert. The machine may be used, maintained and repaired only by persons who are familiar with it and have been instructed about the dangers connected with it.
Safety Pos : 11.6.5 /BA/Sicherheit/Sic her hei ts- und U nfall ver hütungs-Vorschriften Swadro_Ladewag en_Eas yC ut @ 73\mod_1308298589597_78.doc x @ 655493 @ 2 @ 1 Safety Instructions and Accident Prevention Regulations Please follow all generally applicable safety and accident prevention regulations in addition to the safety instructions contained in these operating instructions! The attached warning and safety signs provide important information for safe operation.
Safety Parts operated by external power (e.g. hydraulically) can cause crushing and shearing injuries! Before leaving the tractor, lower the implement onto the ground, apply the parking brake, switch off the engine and remove the ignition key! Pos : 11.6.6 /BA/Sicherheit/Angebaute Ger äte/Ger äte angebaut Eas yC ut @ 3\mod_1204552588996_78.doc x @ 70752 @ 2 @ 1 Attached devices Use extreme caution when attaching or detaching implements onto or from the tractor! Couple the respective application devices to the appropriate couplings (e.g.
Safety Pos : 11.6.8 /BA/Sicherheit/Zapfwellenbetri eb Traktor @ 0\mod_1199699899350_78.doc x @ 33264 @ 2 @ 1 PTO operation 1 Use only PTO shafts specified by the manufacturer! 2 The guard tube and guard cone of the PTO shaft and the PTO guard must be attached and in good working condition (on the implement side, too)! 3...
Safety Pos : 11.6.11 /BA/Sic herheit/H ydrauli kanl age @ 2\mod_1203503691986_78.doc x @ 66225 @ 2 @ 1 Hydraulic system 1 The hydraulic system is pressurised! 2 When connecting hydraulic cylinders and motors, make sure the hydraulic hoses are connected as specified! 3...
Replacement parts must at least comply with the technical requirements set by the manufacturer of the implements! This is guaranteed by original KRONE spare parts! Only use nitrogen for filling pneumatic accumulators - risk of explosion!
Safety Pos : 11.6.18 /BA/Sic herheit/Eigenmäc htiger U mbau und Ers atz teil hers tell ung @ 1\mod_1201937705539_78.doc x @ 55745 @ 2 @ 1 Unauthorised Conversion/Modification and Spare Parts Production Conversions or modifications of the machine are permitted only with prior consultation with the manufacturer.
Safety Pos : 11.8 /BA/Sicher heit/Eas yC ut/Sic her hei t Ei nführ ung Eas yC ut @ 3\mod_1204553763950_78.doc x @ 70812 @ 2 @ 1 4.11 Introduction The disc mower is equipped with all safety devices (protective devices). However, it is not possible to eliminate all potential hazards on this machine as this would impair its full functional capability.
Pos : 11.13 /BA/Sic herheit/Aufkleber/Eas yC ut/Sic her heitsaufkl eber Eas yC ut F 280/320/360 F 280/320/360M @ 103\mod_1332256664114_78.doc x @ 942133 @ @ 1 Fig. 2 EasyCut F 280, EasyCut F 320, EasyCut F 360 Abb. 3 EasyCut F 280 M; EasyCut F 320 M, EasyCut F 360 M...
Page 21
Safety Before starting the machine, The PTO speeds must not exceed 1000 rpm! read and observe the The operating pressure of the hydraulic system operating instructions and must not exceed 200 bar! safety instructions. 939 101-4 1000/ MAX. Order No. 939 471-1 (1x) MAX.
Pos : 14.7 /Abkürzungen /Abkürzungen s prac hneutr al/Eas yC ut/Eas yC ut F 280 M / Eas yCut F 320 M / Eas yCut F 360 M @ 103\mod_1332236742140_0.doc x @ 941066 @ @ 1 (EasyCut F 280 M / EasyCut F 320 M/ EasyCut F 360 M) Pos : 14.8 /BA/Inbetriebnahme/Ersti nbetri ebnahme/Erstmontage @ 1\mod_1202224111998_78.doc x @ 58190 @ @ 1...
Pos : 14.10 /Abkürz ungen /Abkürz ung en spr ac hneutral/Eas yC ut/Eas yCut F 280 / Eas yC ut F 320 / Eas yC ut F 360 @ 103\mod_1332231912643_0.doc x @ 940949 @ @ 1 (EasyCut F 280 / EasyCut F 320 / EasyCut F 360) Pos : 14.11 /Ü...
Page 24
Commissioning 8,4 x 24 x 2 9 x 36 x 2,5 Fig. 5 Pos : 14.13 /BA/---------------Seitenumbr uc h---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1...
Start-up Pos : 16.24 /BA/Inbetri ebnahme/Eas yCut/Probel auf nac h Erstmontag e @ 3\mod_1205215927275_78.doc x @ 73555 @ 12 @ 1 Trial run after first installation Caution! After the first connection to the tractor, the machine must undergo a trial run. •...
Driving and Transport Pos : 18.1 /Übersc hriften/Übersc hriften 1/F-J/F ahr en und Trans port @ 0\mod_1196330049217_78.doc x @ 6553 @ 12 @ 1 Driving and Transport Pos : 18.2 /BA/Sicher heit/Fahren und Trans port/Mitfahr en Straß enfahrt/Gefahr Straß enfahrt, Mitfahren Eas yCut Front @ 3\mod_1204784303933_78.doc x @ 72994 @ @ 1 Danger! - Transport / road travel Effect: Danger to life, serious injuries or serious damage to the machine.
Page 34
Driving and Transport Pos : 18.7 /BA/F ahren und Tr ansport/Eas yCut/Vor baumaß Länderabhängig EC _Front @ 3\mod_1204784822668_78.doc x @ 73052 @ @ 1 A 3,5 m EC-224-0 Fig. 14 Note - Depending on the country If the front end dimension "A" exceeds 3.5 m, provide suitable means (e.g. assistant giving instructions or mirror at road junctions) to ensure road safety (data sheet for attached implements supplied by the Federal Minister for Transport).
Operation Pos : 20.8 /Übersc hriften/Übersc hriften 2/P-T/Sc hutze in Arbeits stellung bring en @ 35\mod_1257499551281_78.doc x @ 329310 @ 22 @ 1 Moving the guards into the working position Pos : 20.9 /BA/Bedi enung /Eas yC ut/Sc hutz e/Schutz e i n Arbeitss tell ung bringen EC F 280/320/360 (M) @ 103\mod_1332227510057_78.doc x @ 940628 @ @ 1 EC-428-0 EC-0-013 Fig.
Settings Pos : 22.1 /Übersc hriften/Übersc hriften 1/A-E/Ei nstellungen @ 0\mod_1199868783862_78.doc x @ 36141 @ 21 @ 1 Settings Pos : 22.2 /BA/Sicher heit/Gefahr enhi nweis e/M ähwer ke/Gefahr - Reparatur_Wartung _Rei nigungs_3 @ 0\mod_1196660613260_78.doc x @ 9153 @ @ 1 Danger! - When performing repair, maintenance or cleaning work on the machine , or in the case of technical intervention, drive elements may start moving.
Settings Pos : 22.10 /Ü bersc hriften/Ü berschriften 2/A-E/Einstellung der Entl astungsfedern @ 0\mod_1196666659447_78.doc x @ 10133 @ 2 @ 1 Adjusting the Compensation Springs Pos : 22.11 /BA/Ei nstellungen/M ähwer ke/Eas yCut/Bodendruc k/Bodendr uc k allgemeiner T ext alle EC @ 0\mod_1196667271181_78.doc x @ 10190 @ @ 1 The ground pressure for the cutter bar is adjusted to local conditions by means of the compensation springs.
Pos : 22.20 /BA/Ei nstellungen/M ähwer ke/Eins tell ung der Keilriemens pannung EC F 280 / F 320 @ 104\mod_1332324556266_78.doc x @ 942981 @ 21 @ 1 Setting of the V-belt Tension (except EasyCut F 280 M / EasyCut F 320 M / EasyCut F 360 M) EC-0-008 Fig.
Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability • Use only authentic KRONE spare parts and accessories authorised by the manufacturer. The use of spare parts, accessories or additional equipment not manufactured, tested or approved by KRONE will exclude any liability for consequential damage.
On request Mower drive gearbox 0.9 l SAE90 Cutter bar EasyCut F 360 M 8.0 l Pos : 24.28 /BA/War tung/Zei tinter valle an den Getrieben 200 h @ 0\mod_1196951919921_78.doc x @ 15373 @ 23 @ 1 10.5.1 Oil Level Check and Oil Change Intervals (Gearboxes)
Pos : 24.32.2 /Abkürz ungen /Abkürz ung en spr ac hneutral/Eas yC ut/Eas yCut F 280 M / Eas yC ut F 320 M / Eas yC ut F 360 M @ 103\mod_1332236742140_0.doc x @ 941066 @ @ 1 (EasyCut F 280 M / EasyCut F 320 M/ EasyCut F 360 M) Pos : 24.32.3 /BA/Wartung/Öl kontroll e_Wechsel/M ähwer ke/Bild Wi nkelgetriebe EC F 280 M / 320 M / 360 M @ 103\mod_1332236600707_78.doc x @ 941037 @ @ 1...
Pos : 24.43 /Abkürz ungen /Abkürz ung en spr ac hneutral/Eas yC ut/Eas yCut F 320 M / F 360 M @ 103\mod_1332237563100_0.doc x @ 941095 @ @ 1 (EasyCut F 320 M / EasyCut F 360 M) Pos : 24.44 /BA/War tung/Öl kontroll e_Wechsel/M ähwer ke/Bild M äher antriebsgetri ebe EC F 320 @ 89\mod_1322735746488_78.doc x @ 766089 @ @ 1 EC-399-0 Fig.
Maintenance Pos : 24.50.1 /Ü berschriften/Ü berschriften 2/K-O/Ölstands kontroll e und Öl wec hs el am Mähhol m @ 0\mod_1197017549815_78.doc x @ 15963 @ 2 @ 1 10.10 Oil level check and oil change on the cutter bar Pos : 24.50.2 /Ü berschriften/Ü berschriften 3/K-O/Öl wec hs el @ 0\mod_1197021941955_78.doc x @ 16139 @ 33 @ 1 10.10.1 Oil change Pos : 24.50.3 /BA/Wartung/Mähwerke/Hi nweis Ei n Öl wec hs el am M ähhol m ist nicht erfor derlich.
Page 53
Maintenance Pos : 24.50.10 /BA/Wartung/M ähwer ke/Öl kontr olle M ähholm Eas ycut @ 3\mod_1204723206930_78.doc x @ 72428 @ @ 1 • Allow the machine to run briefly. Do not leave the driver’s cab until the cutting discs/blade drums have come to a complete stop EC-0-003 Fig.
Maintenance Pos : 24.52.8 /BA/Wartung/Mähwerke/M ess ersc hraub / M ess ersc hnell vers chl uss/M ess ersc hraubversc hlus s H altebolzen 14 mm @ 0\mod_1197267907375_78.doc x @ 16425 @ 33 @ 1 10.11.2 Blade screw connection Danger! - Insufficient thickness of material on the retaining bolts. Effect: Danger to life or serious injuries.
Maintenance Pos : 24.52.10 /BA/Wartung/M ähwer ke/M ess erschr aub / M ess erschnellversc hlus s/M essers chnell versc hlus s H altebolzen 14mm @ 0\mod_1197268087875_78.doc x @ 16444 @ 33 @ 1 10.11.3 Blade Quick-Fit Device Danger! - Insufficient thickness of material on the retaining bolts. Effect: Danger to life or serious injuries.
The abrasion limit of the leaf springs will be achieved if the application seam (1) is worn on one point. EC 225 0 Fig. 32 Note Use only original Krone spare parts to replace the leaf springs. Pos : 24.52.13 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1...
In case of deformed cuttings discs or drums, the dimension of A = 48 mm must never be exceeded. EC-0-211 Fig. 33 Note The cutting discs or drums must be replaced by Original Krone spare parts only. Pos : 24.52.15 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1...
If cutting discs or blade drums show deformations or wear in form of abrasions (2) or similar, these components have to be replaced by Original Krone spare parts . Pos : 24.52.17 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1...
Maintenance Pos : 24.52.28 /BA/Wartung/M ähwer ke/Stoß kanten erneuern @ 0\mod_1197271320468_78.doc x @ 16636 @ 2 @ 1 10.13 Replacing the linings Caution! - If the linings are checked irregularly. Effect: Damage to the machine • Always check the mowing unit for damaged linings prior to start-up and replace linings, if necessary! •...
Maintenance Pos : 24.54.8 /BA/Wartung/Mähwerke/Sc hersic herung/Nac h dem Absc heren Eas yCut @ 3\mod_1204205154608_78.doc x @ 69944 @ 3 @ 1 10.14.1 After Shearing Off Caution! - Correct installation position of the bearing housing not observed. Effect: Damage to the machine •...
Page 67
• Remove the hub (1). • Remove the damaged shear pins (3). • Check the nut and hub for damage. Replace damaged parts with KRONE original replacement parts. • Fill the space above the bearing with grease (c). • Place the hub on the pinion shaft.
Perform the necessary repair tasks during the time immediately after the harvest season. Draw up a list of all replacement parts you will need. This will make it easier for your KRONE dealer to process your orders and you will be certain that your machine will be ready for use at the beginning of the next season.
Before the Start of the New Season Pos : 27.4 /Übersc hriften/Übersc hriften 1/U-Z/Vor Beginn der neuen Sais on @ 4\mod_1211272647559_78.doc x @ 82867 @ 21 @ 1 Before the Start of the New Season Pos : 27.5 /Übersc hriften/Übersc hriften 2/P-T/Spezi elle Sic her heitshi nweis e @ 0\mod_1196660495760_78.doc x @ 9134 @ 2 @ 1 13.1 Special Safety Instructions Pos : 27.6 /BA/Sicher heit/Gefahr enhi nweis e/M ähwer ke/Gefahr - Reparatur_Wartung _Rei nigungs_4 allgemei n Eas yC ut @ 11\mod_1223620198301_78.doc x @ 148349 @ 2 @ 1...
Page 72
Before the Start of the New Season Pos : 27.10 /BA/Ei nlag erung/Eas yC ut / AM M ähwer ke/Vor der Saisaon ohne Bereifung @ 3\mod_1204731533226_78.doc x @ 72767 @ @ 1 • Lubricate the machine thoroughly. Remove any condensation water which may have collected in the bearings.
Special equipment Pos : 33.1 /BA/Sonder ausstatung/Eas yCut / AM M ähwer ke/U mbau auf schmaler e Schwadabl age EC F 280 M / 320M / 360M @ 103\mod_1332253206412_78.doc x @ 941729 @ 2 @ 1 14.2 Conversion to narrower swathing (EasyCut F 280 M, EasyCut F 320 M, EasyCut 360 M) EasyCut F 280 M EasyCut F 320 M...
Page 75
Special equipment • Install the plates (1,2). Make certain when attaching the plates that the distance from the rubber pads (7) to the mower drums is at least 3 mm. Note - Reinstallation is in the reverse order Before starting up the machine again, make certain to check the cutter blades, retaining bolts, cutting discs, and drums as well as the linings •...
Special equipment Pos : 33.3 /BA/Sonder ausstatung/Eas yCut / AM M ähwer ke/U mbau für steiles Bergabmähen EC F 280 M / 320M / 360M @ 103\mod_1332254073902_78.doc x @ 941818 @ 2 @ 1 14.3 Conversion for mowing steep slopes (EasyCut F 280 M, EasyCut F 320 M, EasyCut 360 M) EasyCut F 280 M EasyCut F 320 M...
Page 77
• Mount the cutting discs (5) and covers (6). To do this, reuse the fastening bolts and detent edged washers of the mower drums that were removed. Note Follow the steps in the reverse order for reinstallation (see also Chapter "Conversion to Narrower Swathing").
index Install the PTO shaft .......... 31 Installation of Weiste triangle......26 Abrasion Limit .............60 Intended Use............9 Adjusting the Compensation Springs ....42 Introduction ............7 Adjusting the cutting height ........43 Affixing the Adhesive Safety and Information Labels ..............19 Lighting ............27, 34 After Shearing Off ..........67 Lower suspension arm........
Page 79
Start-up ...............28 Tightening Torques ..........46 Tightening Torques (Countersunk Screws) ..47 Tyres ..............16 Technical data ............9 Telescopic upper suspension arm......43 Test run...............72 Unauthorised Conversion/Modification and Spare Parts Production ..........18 Test run...............45...