Reliability Test; Testing Psu Redundancy - Huawei 5288 V5 Acceptance Manual

5288 V5 Server
Acceptance Guide
Procedure
Expected Results
Test Result
Remarks

4.3 Reliability Test

4.3.1 Testing PSU Redundancy

Case No.
Test Objective
Test Networking
Diagram
Prerequisites
Issue 03 (2019-03-25)
On the iBMC WebUI, choose Information > System Info.
Check the following information:
Processor information (manufacturer, model, frequency, number
of cores, and cache)
Memory information (manufacturer, capacity, frequency, type,
voltage, bit width, and serial number)
PSU information (manufacturer, rated power, and input mode)
Fan module information (model, speed, and speed ratio)
Component information is queried successfully on the iBMC
WebUI.
4.3.1
To verify that PSUs on the server work in redundancy mode.
See section 2.1 Network
l The server is powered on.
l A Linux OS has been installed on the server.
Copyright © Huawei Technologies Co., Ltd.
4 Test Cases and Records
Diagram.
18