LCD Contrast(Contrast)
Adjusts the contrast of the LCD.
Adjust the slide bar.
(Basic Operation p.13)
Setting Range
5 intervals(
LCD contrast will characteristically be darker when warm and
P
lighter when cold. Make corresponding contrast adjustments if this
is a concern for you.
Sound Volume(SoundVol)
Adjusts the sound level of the transmitter buzzer.
Adjust the slide bar.
Setting Range
2 intervals (
Default
:3)
(Basic Operation p.13)
Default
:2)
Buzzer(Buzzer)
Sets the transmitter buzzer type.
Select the desired choice.
Setting Range
OFF, 7 types (
Key Repeat(KeyRepeat)
Adjusts the delay between operations if the ET/BT key is
pressed repeatedly.
Adjust the slide bar.
Setting Range
5 intervals (
0:Key Repeat Disabled
1:1 second (decreases to 0.5 seconds after 5 presses)
2:0.8 seconds (decreases to 0.4 seconds after 5 presses)
3:0.6 seconds (decreases to 0.3 seconds after 5 presses)
4:0.3 seconds (decreases to 0.1 seconds after 5 presses)
5:0.1 seconds
P
Sliding the bar towards + will shorten the delay time.
39
(Basic Operation p.13)
Default
:3)
(Basic Operation p.13)
:3)
Default