Startup Screen And Initial Screen - Ko Propo EX-1 ASF Instruction Manual

●Startup Screen and Initial Screen
When the transmitter is switched on, the startup screen will display, followed by the initial screen.
Pressing the ENTER key during the startup screen will allow you to proceed to the initial screen.
Startup Screen
Initial Screen
Model Number:
Model Name:
Steering Trim Monitor:
Throttle Trim Monitor:
Function Monitor:
Power Source Type:
Notice)
Voltage:
Displays the current power source voltage.
Operation Time:
Response Mode:
Control Mode:
Direct Button:
Press the ENTER key
Displays the currently selected model number.
Displays the name of the currently selected model number.
Displays the position of the steering trim.
Displays the position of the throttle trim.
Functions that are in active will be lit up.
AUT:Throttle Auto Start
ABS:Throttle ABS
SOR:Steering Travel Override
TIM:Timer Activated (including Throttle Start Ready)
Displays the type of battery being used.
LP:Li-Po DR:R03/AAA/UM4 Alkaline Batteries
LF:Li-Fe NI:Ni-MH
If you switch battery types, make sure to also change the [Battery Management] setting.
Displays how long the transmitter has been used.
Displays the Steering (S) and Throttle (T) Response
ADV:Advanced High Speed
Displays 3CH (3) and 4CH (4) control mode.
--:OFF
2WAY: 2WAY
3WAY: 3WAY
5WAY: 5WAY
ANLG: ANALOG
Displays the functions assigned to each of the 4 buttons.
to proceed to [Main Menu].
Version Information:
Displays the version of the program that is installed in the Master Unit's
CPU.
HSPD:Super High Speed NORM:Normal Speed
(p.32)
14
(p.16)
(p.16)
(p.18)
(p.23)
PRE:PRESET
ACC:Throttle Acceleration
BOR:Brake Override
DBK:Drag Brake
(p.43)
(p.42)
(p.40)
(p.41)