Waveform:yreference - Keysight InfiniiVision M9241A Scpi Programmer's Manual

32
:WAVeform Commands

:WAVeform:YREFerence

Query Syntax
:WAVeform:YREFerence?
The :WAVeform:YREFerence? query returns the y-reference value for the currently
specified source. This value specifies the data point value where the y-origin
occurs. In this product, this is the data point value of the center of the screen. It is
undefined if the format is ASCii.
Return Format
<value><NL>
<value> ::= y-reference value in the current preamble in 32-bit
See Also •
•
•
Example Code •
1192
(see page 1354)
NR1 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:YORigin"
"Example Code" on page 1175
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 1160
on page 1174
on page 1191