Programming A Feature Code Onto A Memory Button; Programming Feature Buttons; Erasing A Feature Button - Nortel Modular ICS 6.0 Manual

Programming a feature code onto a memory button

You can program a feature code onto a memory button. In
some cases, pressing the button a second time cancels the
feature.

Programming feature buttons

Any memory button not programmed as an external or internal
line, target line, Answer button, or Handsfree/Mute button, is
available for features.
² ¥ Ü
1. Press
2. Press the memory button you want to program with a
feature.
3. Enter the appropriate feature code you want to assign onto
the button.
The following feature codes cannot be programmed onto a
memory button: Long Tones and any code beginning with
² ¥ Þ â Ú
except
(Contrast Adjustment).
Tip -
code, you must enter a line pool access code after the feature
code. The programmed line pool button accesses a specific line
pool, not the line pool feature.

Erasing a feature button

² ¥ Ú
1. Press
2. Press the feature button.
³
3. Press
P0992640 03
.
(Language Choice) and
When you program a button with the line pool feature
.
or OK to erase the button.
Customizing your telephone / 139
Modular ICS 6.0 System Coordinator Guide
¥
² ¥ à