Time Savers For Making Calls; Storing A Number On A Memory Button For Autodial; Adding An Autodial Button - Nortel Modular ICS 6.0 Manual

Time savers for making calls

Storing a number on a memory button for Autodial

You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
Buttons used for lines, answer or Handsfree/Mute cannot be
used as autodial buttons.
If the power to your Norstar system is off for more than three
days, autodial numbers, and some other system programming,
may be lost from the memory.

Adding an autodial button

Use these features to program external and internal numbers.
² ¥ Ú
1. Press
² ¥ Û
Press
2. Choose a button and then enter the number as if you were
dialing it.
When programming Autodial you can use:
• Last Number Redial
• Saved Number Redial
• destination codes — choose ∆ as the line
• host system signalling
P0992640 03
to program an external number.
to program an internal number.
Modular ICS 6.0 System Coordinator Guide