Erasing Log Items; Making A Call Using Call Log - Nortel Modular ICS 6.0 Manual

132 / Tracking your incoming calls

Erasing log items

You should routinely erase log items to make space for new
items in your log.
1. Display the item you want to erase.
³
2. Press
¨
3. Press
If you accidentally erase an item, you can retrieve it.
³
1. Press
¨
2. Press

Making a call using Call Log

You may find it helpful to place calls from within your Call
Log. The number stored for each call may vary depending on
the type of call. For example, if the call was placed from a
Centrex or PBX system, the first few numbers may need to be
trimmed before you can make the call. If the number you want
to call is long distance, or if you want to use a line pool, you
may need to add numbers.
To place a call:
1. Display the log item for the call you want to place.
Ã
2. Display the associated telephone number.
3. Press
want to remove.
4. Dial any extra digits required.
5. Press an external line or line pool button.
6. Lift the receiver. (This is not necessary if Handsfree is
programmed at your telephone.) The displayed number is
dialed.
Modular ICS 6.0 System Coordinator Guide
or ERASE.
to exit.
or UNDO immediately.
to exit.
or TRIM, once for every digit that you
P0992640 03