Nortel Modular ICS 6.0 Manual page 119

4. Press ≠ twice.
5. Press ' six times. The display reads Page Zone.
6. Press CHANGE to select the setting: 1, 2, 3,4, 5, 6 or None.
You can make a telephone part of a page zone only if the
telephone has paging set to Y (Yes).
A zone is any set of Norstar telephones that you want to group
together for paging, regardless of their location. The
maximum number of sets in a page zone is 50.
Your installer programs whether a tone sounds before a page
begins, and the maximum number of seconds a page can last
before it is automatically turned off.
Tip -
announcements has a list showing which telephones are in
which page zones. Enter this information into your Modular ICS
6.0 Programming Record.
Displays
Enter zone:___
Invalid zone
Page choice:
SETS SPKR
Page timeout
Paging ALL
Paging busy
For other displays, see Common feature displays on page 247.
P0992640 03
Make sure that everyone who needs to make page
Enter the desired page zone number (0- 6) or
ALL
press ALL .
You have entered a page zone code that is
not between 0 and 6.
Select the type of page you want. See the list
BOTH in Making a page announcement on page
117.
The time allotted for paging has expired.
You are making a page. The display shows
the page zone you have chosen. Press
¨
or
A page is already being made in the page
zone you have requested.
Communicating in the office / 119
when you are finished.
Modular ICS 6.0 System Coordinator Guide
²