What Would You Like To Do Next - Nortel Modular ICS 6.0 Manual

40 / Frequently used programming operations
Show set:___
If the set has been given a name, it appears on the display.
225:225
Capabilitiesˆ
Fwd no answerˆ
DND on Busy:N
DND on Busy:Y
Press ' to continue programming capabilities for this telephone, or
press – three times to return to the Terminals and Sets heading.
End of session
For more information on Call Forward and similar settings, see
Forwarding your calls to another Norstar telephone on page
105.

What would you like to do next?

Some of the most common programming tasks are listed below.
For a comprehensive list of settings and instructions, see either
the Table of Contents or the Index.
Redirect calls coming in on a line.
Allow individuals to answer calls that are
ringing at another telephone.
Assign telephones to different zones for
paging.
Modular ICS 6.0 System Coordinator Guide
Enter the internal number of the telephone
LIST
extension. This becomes the number for the
intercom button. In this example, number is 225.
Press ≠ .
FIND
Press ≠ .
Press ' twice.
Press CHANGE to turn the feature on.
CHANGE
A second press turns it off again. Press
CHANGE
your session.
See Turning on Line Redirection
on page 110.
See Picking up a call ringing at
another telephone on page 52.
See Paging on page 117.
¨
to end
P0992640 03