Creating A Conference Call - Nortel Modular ICS 6.0 Manual

If more than one call is ringing at a telephone, the first call
appears on the attendant Answer button. Any subsequent calls
appear on intercom buttons, if they are available.
Tip -
a single telephone. This allows two or more attendants to handle
calls for a busy person.
Each telephone can handle calls for up to eight other people
using a separate Answer button for each person.

Creating a Conference Call

You can talk to two people at once.
1. Make sure you have two calls, one active and one on hold.
² Ü
2. Press
3. Press the appropriate button to retrieve the held call.
This is automatic on the M7100 and T7100 telephones.
You can create a conference when you are on a call.
1. Make a second call.
² Ü
2. Press
3. Press the button where the first call is on hold to create a
conference.
Only the person who established the conference can process
the conference by using the procedures described in this
section.
Tip -
call. See Turning Privacy on or off for a call on page 66.
P0992640 03
More than one attendant may have an Answer button for
.
.
You can create a conference by releasing privacy on a
Answering calls / 57
Modular ICS 6.0 System Coordinator Guide