162 / Programming Hunt Groups
The Hunt Groups subheading in system programming is the
area where programming changes are made to the following:
•
members of a group
•
member position in a group
•
what lines are assigned to a group
•
how incoming calls are distributed
•
how long the system looks for available members
•
where a call goes if all members are busy
Note: Videophones should not be programmed as members of
a Hunt Group. Hunt Groups allow one B channel
connection at a time and videophones use two B
channels.
Features affected by Hunt Groups include:
•
Call Forward All Calls
•
Call Forward No Answer
•
Call Forward on Busy
•
Group Pickup
•
Transfer via Hold
•
Priority Call
•
Line Redirection
•
Page Zones
•
Voice Call
Modular ICS 6.0 System Coordinator Guide
P0992640 03