54 / Answering calls
first followed by calls on the prime line and, finally, calls on
internal lines.
Tip -
also a member of a call pickup group can be picked up by any
Norstar set in that call pickup group. For more information on
Hunt Groups see Programming Hunt Groups on page 161.
Changing a telephone pickup group
Telephones can be put into and taken out of pickup groups.
You need the programming template found at the front of this
guide. See Getting started with Norstar on page 13 for more
information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
password).
3. Press ≠ and enter the internal number of the
telephone you want to program.
4. Press ≠ twice.
5. Press ' five times.
6. Press CHANGE at Pickup grp: to assign the telephone to
pickup group 1, 2, 3, or 4, 5, 6, 7, 8, 9, or to None.
Displays
Already joined
Modular ICS 6.0 System Coordinator Guide
A Hunt Group call ringing at a Norstar set DN that is
(the default System Coordinator
You are already connected to the telephone
that made the call you are trying to pick up.
This can happen if you are on a call to a
co-worker, your co-worker dials the number
of a telephone in your pickup group, and you
attempt to pick up that call.
.
P0992640 03