124 / Communicating in the office
Tip -
designated direct-dial telephone can send messages to an
analog telephone connected to an Analog Station Module
(ASM) using
invoke a single digit access code to reach the designated
direct-dial telephone and retrieve messages.
If the designated direct-dial telephone of an analog telephone
connected to an Analog Station Module (ASM) is changed,
messages sent by the previous designated direct-dial
telephone are kept in the incoming message list of the analog
telephone until they are retrieved.
Removing items from your message list
You can erase a message while you are viewing it in your
message list. If the message is from your voice message center,
this only erases the message notification at your telephone.
You need to erase the voice message at your voice message
center. Refer to your voice message center documentation.
On a telephone with a one-line display
³
Press
On a telephone with a two-line display
Press ERASE.
Removing items from your message list using an analog
telephone connected to an ASM
To remove both internal and external messages on an analog
telephone connected to an Analog Station Module
Press ˚
Waiting feature.
On analog telephones connected to an ASM, the Cancel
Message Waiting feature cancels the oldest message received.
Modular ICS 6.0 System Coordinator Guide
If there is no voice mail system installed, only the
² Ú
. The analog telephone can in turn
.
£ ß Þ
to invoke the Cancel Message
P0992640 03