Using A Central Answering Position (Cap) Module; Customizing Your Cap Module - Nortel Modular ICS 6.0 Manual

Using a central answering position (CAP) module

A central answering position (CAP) is a Norstar M7324
telephone and a CAP module that your installer or customer
service representative programmed as a CAP. You can have
five CAPs in a Norstar Modular system. It is best if the CAP is
the prime telephone and direct-dial telephone for the lines and
telephones it serves.
Norstar M7324 set with added CAP module
A CAP module is an add-on device that provides 48 extra
memory or line buttons. You can connect one or two Norstar
CAP modules to the telephone to increase the number of lines
it can handle.
When a CAP module is first plugged into your telephone,
some of the module buttons are already programmed to dial an
internal number.

Customizing your CAP module

If your installer has programmed the CAP module to be the
central answering position for your system, you can move
external lines onto the CAP module by using
See Moving line buttons on page 151.
Any of the buttons on your CAP module that do not select lines
can be programmed to dial internal or external numbers
P0992640 03
M7324 telephone
Modular ICS 6.0 System Coordinator Guide
Answering calls / 47
CAP module
² ¥ ¡ Ú
.