Using The Administration Set To Control Alarms - Nortel Modular ICS 6.0 Manual

18. Press CHANGE to choose either Y (yes) or N (no).
¨
19. Press

Using the Administration set to control alarms

Only a Hospitality Services set can use this alarm
administration feature. This feature is also associated with a
room number, and cannot be used on common sets.
Use this feature to:
• query a current or last alarm time set for a room
• assign an alarm time for any room
• change an alarm time for any room
• cancel an pending alarm for any room
To program the alarm, follow these steps:
1. Press
² ¡ à à .
2. Enter the Desk admin password if you are prompted for a
password.
The set displays: al of rm#:
3. Enter the room number.
4. Press VIEW. The set displays Alrm: 07:00am OFF:.
If the alarm time is correct, press the ON/OFF display key.
If you want to change the time, enter a new four-digit
alarm time.
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. The set
displays: Alarm ON hh:mm
P0992640 03
to exit or ' to continue programming.
Using the Hospitality features / 183
Modular ICS 6.0 System Coordinator Guide