Deleting An Assigned Password; Programming A Telephone To Log Calls Automatically - Nortel Modular ICS 6.0 Manual

134 / Tracking your incoming calls

Deleting an assigned password

Use this procedure when you want to delete an assigned
password.
² ¥ ¡ Þ
1. Press
2. Enter your old password. The display reads
New passwrd:.
³
3. Press
which confirms that your password has been deleted.

Programming a telephone to log calls automatically

Your installer or customer service representative can program
each telephone to automatically log calls coming in on a line.
Displays
1:Unknown name
1:Unknown number
12:KATE SMITH
NEXT ERASE
¯
12 KATE SMITH
NEXT ERASE
§
12 KATE SMITH
NEXT ERASE
49/1234567890123
NEXT ERASE
Call(s) bumped
Modular ICS 6.0 System Coordinator Guide
. The display reads Old passwrd:.
or OK. The display reads No pswd assigned,
The caller's name is unavailable.
The caller's number is unavailable.
_ indicates a new item.
MORE
¯
indicates that the call was answered.
MORE
§
indicates a long distance call.
MORE
Ã
/
indicates that the stored number has
MORE
been shortened to its final 11 digits. Press
information about the call.
One or more log entries have been deleted
by the Autobumping feature while you are
looking at the Call Log.
or MORE to display additional
P0992640 03