Using The Alarm - Nortel Modular ICS 6.0 Manual

184 / Using the Hospitality features
If the clock uses a 12-hour format, enter the time, then
when the set displays: hh:mm AM or PM?, press AM or PM.
The set displays: Alarm ON hh:mm.
¨
5. Press

Using the alarm

To set an alarm on a digital telephone:
1. Press
² ¡ à Þ .
OFF
2. Do one of the following:
If the alarm is correct, press ON/OFF.The set displays:
Alrm:07:00am ON. Press DONE to exit.
If you need to change the alarm time, press CHG. The set
displays: Enter time:
3. To enter a new time, do one of the following:
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. The set
displays: Alarm ON hh:mm
If the clock uses a 12-hour format, enter the time, then
when the set displays: hh:mm AM or PM?, press AM or PM.
The set displays: Alarm ON hh:mm.
To set an alarm on an analog set:
1. Press ˚
2. Enter a four-digit alarm time:
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. A tone sounds.
If the clock uses a 12-hour format, enter the time, then
¥
press
Modular ICS 6.0 System Coordinator Guide
to exit.
The displays shows Alrm:07:00
¥ ¡ à Þ
to select am or
. A tone sounds.
£
to select pm. A tone sounds.
P0992640 03