Using The Hospitality Features; Hospitality Passwords - Nortel Modular ICS 6.0 Manual

Using the Hospitality features

This section describes the Hospitality Services feature which
is used to administer room and alarm services in small to
medium-sized facilities such as hostels, motels, or hospitals.
There are three types of sets that make up this type of system:
Common set—this telephone can be found in the lobby,
office, or common area, and is not associated with a room.
This type of set cannot access all of the features.
Room set—this telephone resides in a specific room and can
be used by both guests and cleaning staff to set alarms or
indicate room condition. Up to five sets can be assigned to the
same room number, such as for fax lines, internet dial-up, etc.
Administration set—this telephone must be a two-line
display set and is usually configured with a password to allow
secure administration of room occupancy and condition
services and alarm services.

Hospitality passwords

There are two passwords within the hospitality feature. One
provides secure access to the administration set, and one
provides secure access to a room condition setting from each
room set for housekeeping staff.
Desk pswd
Change this password frequently, to maintain security.
1. Place the appropriate programming overlay on the set you
are using to do programming.
² ¥ ¥ Û ß ß Ü Ý Ý
2. Press
display shows Password:.
P0992640 03
(CONFIG). The
Modular ICS 6.0 System Coordinator Guide