Do Not Disturb - Nortel Modular ICS 6.0 Manual

70 / Making calls
Already joined
Calling 221
PRIORITY
Can't ring again

Do not disturb

PRIORITY
Expensive route
Hidden number
Line denied
Line001
No last number
No line selected
Not in service
Modular ICS 6.0 System Coordinator Guide
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.
Wait for the telephone to be answered. If no
LATER
one answers, press
Again (page 77) or Message (page 120)
feature, or press
call.
You cannot use Ring Again on your current
call. You can only use Ring Again while you
have a busy signal on an internal call or line
pool request or while an internal call is
ringing.
The telephone you are calling has Do Not
LATER
Disturb turned on. Press
Ring Again or Messages features, or press
PRIORITY
You have dialed a number, but the least
expensive route that the system is
programmed to use is busy. Unless you
release the call, it goes through on a more
expensive route.
The last number you dialed or the number
you saved for Saved Number Redial was a
speed dial number that displayed a name
rather than the number. The number is dialed
correctly, but you cannot see it.
You have attempted to use the private line
assigned to another user.
Enter the digits of the number you want to
TRANSFER
dial.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Either you have no prime line or your prime
line is busy. Select a line manually before
dialing.
You have entered the number of a telephone
that is not in service.
LATER to use the Ring
PRIORITY to make a priority
LATER
to make a priority call.
to use the
P0992640 03