Programming A Memory - Nortel M220E User Manual

MNPS8592XAA.qxd 6/12/00 10:25 Page 23

PROGRAMMING A MEMORY

M220E has an alphanumeric directory of 3-direct memories
and 20-indirect memories. You may save the numbers (20 cha-
*
racters max with , #) and names (10 characters max) of
your usual correspondents.
1 - Press the key.
2 - Press the key, then select a memory number
(01 to 20) by typing it on the keypad.
or
press the ,
3 - Enter the name using the correspondence between the keys
and the letters as indicated below:
• Select the letter required by pressing successively the corres-
ponding key.
• Wait (2s) to validate the entry and enter a letter in the next
location.
• Press successively on the 1 key to enter space, - or /.
• Press the key to delete an entry if necessary.
4 - Press the key to enter the phone number.
The screen displays the memory number (for example: M01).
5 - Enter the phone number.
6 - Press the
key to confirm.
2 bips are emitted. The memory is stored.
Repeat the sequence for the other memories.
• To stop the sequence when programming,
press the key.
The information is not stored.
or keys.
MEMORY
NAME?_-------
M01:_-------
PAGE 23