Nortel Modular ICS 6.0 Manual page 97

Displays
221 Camp max
221 DND
Camp denied
Camp to:
CANCL
Camped: 221
Line001 hung up
Not in service
Release a call
For other displays, see
P0992640 03
You tried to camp a call to a telephone that
CALLBACK already has a camped call. The call has
come back to you. Press the
button or the line button to reconnect to the
call.
On the M7100 or the T7100 set, just pick up
the receiver.
The person to whom you redirected a call
CALLBACK has Do Not Disturb active on the telephone.
The call has come back to you. Press the
CALLBACK
reconnect to the call. On the M7100
telephone, just pick up the receiver.
You have tried to camp an internal call. You
can only camp external calls.
Dial the number of the internal telephone to
which the call is sent.
The telephone to which you camped a call
CALLBACK
did not answer the call. The call has come
back to you. Press
button to reconnect to the call. On the M7100
or T7100 sets, just pick up the receiver.
A call you camped has come back to you, but
the caller hung up before you could
reconnect.
The telephone to which you have camped a
CALLBACK
call is out of service or is being used for
programming. The call has come back to
you. Press
reconnect to the call. On the M7100 or T7100
sets, just pick up the receiver.
The line that the camped call is on is in use
or that line does not appear at your
telephone. Release the line or release an
internal line.
Common feature displays
Transferring calls / 97
CALLBACK
button or the line button to
CALLBACK
CALLBACK or the line button to
on page 247.
Modular ICS 6.0 System Coordinator Guide
or the line