Usb Device; Gpib Address - Rigol MSO2000A Series User Manual

Chapter 15 System Function Setting

USB Device

This oscilloscope can communicate with PC or PictBridge printer via the USB Device
interface at the rear panel. You need to set the oscilloscope to make it match with
different device types.
Press Utility  IO Setting  USB Device and use
device type.
Computer: in this type, the oscilloscope can communicate with the PC.

PictBridge: in this type, the oscilloscope can communicate with the PictBridge

printer.

GPIB Address

When using the GPIB mode to control the oscilloscope, you need to extend a GPIB
interface for the oscilloscope using the USB-GPIB interface converter (need to be
ordered separately).
To set the GPIB address of this interface, press Utility  IO Setting  GPIB and
use
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
to input the desired address. The default is 1 and the range is from 1 to 30.
GlobalTestSupply
www.
to select the desired
.com
sales@GlobalTestSupply.co
RIGOL
15-7