Usb Device; Gpib Address - Rigol DS2000E Series User Manual

Digital oscilloscope
Hide thumbs Also See for DS2000E Series:
Table of Contents

Advertisement

Chapter 13 System Function Setting

USB Device

This oscilloscope can communicate with a PC or a PictBridge printer via the USB
Device interface on the rear panel. You need to set the oscilloscope to make it
match with different device types.
Press Utility  IO Setting  USB Device and use
device type.
Computer: in this type, the oscilloscope can communicate with the PC.
PictBridge: in this type, the oscilloscope can communicate with the PictBridge
printer.

GPIB Address

When using the GPIB mode to control the oscilloscope, you need to extend a GPIB
interface for the oscilloscope using the USB-GPIB interface converter (need to be
ordered separately).
To set the GPIB address of this interface, press Utility  IO Setting  GPIB and
use
to input the desired address. The default is 1 and the range is from 1 to 30.
DS2000E User's Guide
to select the desired
RIGOL
13-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds2202eDs2102e

Table of Contents