Mounting The Room Display Long Backplate; Connecting The Nisp And Mounting It On The Backplate - ASCOM teleCARE IP Installation Manual

Installation Guide
teleCARE IP
The backplate must be fixed to the wall using the four corner holes and the two holes in the middle of
the backplate (indicated in the drawing below by red circles).
The backplate has an arrangement of fixing holes (indicated in the drawing above by blue circles) which
make it suitable for mounting on various international back boxes.
Caution: Even when the backplate is mounted on a back box it must also be fixed to the wall
with the corner holes and the middle holes.
When the backplate is screwed to the wall connect the NISP and snap fit it to the backplate.
Figure 147. Connecting the NISP and mounting it on the backplate
17 July 2017 / Ver. PF3
= Essential
= Optional
Figure 146. Mounting the room display long backplate
CAUTION!
DO NOT MOUNT THE
ROOM DISPLAY
CLOSE TO OR OVER
METAL OBJECTS.
There must be a
minimum distance of 1
inch (30mm) in all
directions between the
room display and any
metal objects to avoid
the degradation of the
card reader antenna
performance.
TD 93021US
108