Table of Contents
Advertisement
52 Chapter 3: Adding devices to Matrox 4Sight GPm
Important
Caution
Be sure to turn off the power to
the unit and all peripherals as
well as unplug the power from
the unit before adding or
removing devices.
Removing the Matrox 4Sight GPm chassis
cover
Follow the steps listed below to remove the chassis cover:
1. Unplug the Matrox 4Sight GPm power cables.
2. Flip the unit so the bottom plate is easily accessible.
3. Using a Phillips #2 screw driver, remove the screws (illustrated below) from the
Matrox 4Sight GPm unit's sides and bottom panel.
Advertisement
Table of Contents
