Important
Caution
Be sure to turn off the
power to the unit and all
peripher
al,
unplug the power from
the unit before adding
,
or removing devices.
Removing the Matrox 4Sight EV6 chassis
cover
Follow the steps listed below to remove the chassis cover:
1. Unplug the Matrox 4Sight EV6 power cable.
2. Flip the unit so the bottom plate is easily accessible.
3. Using a Phillips #2 screw driver, remove the screws (illustrated below) from the
Matrox 4Sight EV6 unit's sides and bottom panel.
as well as
Removing the Matrox 4Sight EV6 chassis cover
53