Table of Contents
Advertisement
Matrox 4Sight GPm has connectors on its front and back panels to connect to the
following devices:
• USB ports are available to connect to devices such as a USB mouse, keyboard,
printer, flash drive, hard disk drive, or a -connected CD/DVD drive.
Matrox 4Sight GPm (Ivy Bridge) has four USB 3.0 ports (USB 3.0, 2.0, and 1.1
compatible) and two USB 2.0 ports (USB 2.0 and 1.1 compatible),
Matrox 4Sight GPm (Bay Trail) has one USB 3.0 ports (USB 3.0, 2.0, and 1.1
compatible) and two USB 2.0 ports (USB 2.0 and 1.1 compatible).
• Gigabit Ethernet interfaces to connect to a 10/100/1000 Mbits/sec network
(labeled PoE or LAN).
Matrox 4Sight GPm (Ivy Bridge) has six Gigabit Ethernet interfaces.
Matrox 4Sight GPm (Bay Trail) has four Gigabit Ethernet interfaces.
• Two video output display interfaces (DVI-D and DVI-I) to connect a
high-resolution analog display device (such as an analog monitor or analog flat
panel), and a high-resolution digital display device (such as digital flat panels), or
two high-resolution digital display devices.
Note that the analog display device must be connected to the DVI-I output
❖
connector using a DVI-to-VGA adapter.
• Two COM port interfaces (one of which is both RS-232 and RS-485 compatible).
• A stereo audio interface.
• An auxiliary I/O interface to connect 8 open-wire input and 8 open-wire output
devices to your Matrox 4Sight GPm unit.
Connecting peripheral devices
31
Advertisement
Table of Contents
